Peer Connect-Interface (Bgp/Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use peer capability-advertise suppress-4-byte-as to enable 4-byte AS number suppression.
Use undo peer capability-advertise suppress-4-byte-as to disable the function.
By default, the 4-byte AS number suppression function is disabled.
The device supports 4-byte AS numbers and uses 4-byte AS numbers by default. If the peer devices
support only 2-byte AS numbers, you must enable the 4-byte AS number suppression function on
the device.
If the peer device supports 4-byte AS numbers, do not enable the suppression function; otherwise,
the BGP peer relationship cannot be established.
Examples
# In BGP view, enable 4-byte AS number suppression for peer 160.89.2.33.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 160.89.2.33 as-number 100
[Sysname-bgp] peer 160.89.2.33 capability-advertise suppress-4-byte-as
# In BGP-VPN instance view, enable 4-byte AS number suppression for peer 160.89.2.33. (The VPN
must have been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer 160.89.2.33 as-number 200
[Sysname-bgp-ipv4-vpn1] peer 160.89.2.33 capability-advertise suppress-4-byte-as

peer connect-interface (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } connect-interface interface-type interface-number
undo peer { group-name | ip-address } connect-interface
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string 1 to 47 characters.
ip-address: IP address of a peer.
interface-type interface-number: Specifies an interface by its type and number.
236