Ipv6 Default-Route-Advertise - HP FlexNetwork 3600 v2 Series Command Reference Manual

Admin Tag
NextHop
FE80::200:5EFF:FE64:8905
IPV6 Dest
Admin Tag
NextHop
Direct
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
IPV6 Dest
Admin Tag
IPV6 Dest
Admin Tag
NextHop
Direct
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 79 Command output
Field
IPV6 Dest
Cost
Flag/Flags
Admin Tag
Src Count
Next Hop
Interface
ExitIndex

ipv6 default-route-advertise

Syntax
ipv6 default-route-advertise [ [ level-1 | level-1-2 | level-2 ] | route-policy route-policy-name ] *
undo ipv6 default-route-advertise [ route-policy route-policy-name ]
: -
:
: 2001:2::/64
: -
:
ISIS(1) IPv6 Level-2 Forwarding Table
-------------------------------------
: 2001:1::/64
: -
: 2001:2::/64
: -
:
Description
IPv6 destination.
Value of cost.
Flag of routing information status:
•
D—This is a direct route.
•
R—The route has been added into the routing table.
•
L—The route has been advertised in an LSP.
•
U—Route leaking flag, indicating the Level-1 route is from Level-2. U means
the route will not be returned to Level-2.
Administrative tag.
Number of advertisement sources.
Next hop.
Outbound interface.
Outbound interface index.
Src Count : 1
Interface :
Vlan11
Cost : 10
Src Count : 2
Interface :
Vlan11
Cost : 20
Src Count : 1
Cost : 10
Src Count : 2
Interface :
Vlan11
332
ExitIndex :
0x00000003
Flag : D/L/-
ExitIndex :
0x00000000
Flag : -/-/-
Flag : D/L/-
ExitIndex :
0x00000000