Ignore-First-As; Import-Route (Bgp/Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

[Sysname-bgp] peer 10.1.1.1 group test
[Sysname-bgp] peer 10.1.2.1 group test
# In BGP-VPN instance view, create an EBGP peer group test with AS number 200, and add EBGP
peers 10.1.1.1 and 10.1.2.1 into the group. (The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] group test external
[Sysname-bgp-ipv4-vpn1] peer test as-number 200
[Sysname-bgp-ipv4-vpn1] peer 10.1.1.1 group test
[Sysname-bgp-ipv4-vpn1] peer 10.1.2.1 group test

ignore-first-as

Syntax
ignore-first-as
undo ignore-first-as
View
BGP view
Parameters
None
Description
Use ignore-first-as to configure BGP to ignore the first AS number of EBGP route updates.
Use undo ignore-first-as to configure BGP to check the first AS number of EBGP route updates.
By default, BGP checks the first AS number of a received EBGP route update. If the first AS number
is not that of the BGP peer, the BGP router discards the route update.
Examples
# Configure BGP to ignore the first AS number of EBGP route updates.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ignore-first-as

import-route (BGP/BGP-VPN instance view)

Syntax
import-route protocol [ { process-id | all-processes } [ allow-direct | med med-value | route-policy
route-policy-name ] * ]
undo import-route protocol [ process-id | all-processes ]
View
BGP view, BGP-VPN instance view
Default level
2: System level
224