HP FlexNetwork 3600 v2 Series Command Reference Manual page 27

Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a
case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public
network is displayed.
verbose: Displays detailed information about both active and inactive routes. Without this keyword,
only brief information about active routes is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipv6 routing-table to display brief IPv6 routing information, including destination IP
address and prefix, protocol type, priority, metric, next hop, and outbound interface.
The command displays only active routes (the brief information about the current optimal routes).
Use display ipv6 routing-table verbose to display detailed information about all IPv6 routes,
including both active and inactive routes. The output shows the statistics of the entire routing table,
and then the detailed information of each route.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table : Public
Destinations : 1
Destination: ::1/128
NextHop
Interface
Table 4 Command output
Field
Destination
NextHop
Preference
Interface
Protocol
Cost
# Display detailed routing table information.
<Sysname> display ipv6 routing-table verbose
Routing Table : Public
Destinations : 1
Destination
NextHop
IpPrecedence :
: ::1
: InLoop0
Description
IPv6 address of the destination network/host
Next hop address
Route priority
Outbound interface
Routing protocol
Route cost
: ::1
: ::1
Routes : 1
Protocol
Preference: 0
Cost
Routes : 1
15
: Direct
: 0
PrefixLength : 128
Preference : 0
QosLcId :