Ipv6 Import-Route Isisv6 Level-2 Into Level-1 - HP FlexNetwork 3600 v2 Series Command Reference Manual

level-1: Redistributes routes into Level-1 routing table.
level-1-2: Redistributes routes into Level-1 and Level-2 routing tables.
level-2: Redistributes routes into Level-2 routing table.
route-policy-name: Name of a routing policy used to filter routes when they are being redistributed, a
case-sensitive string of 1 to 63 characters.
tag: Specifies a administrative tag number for the redistributed routes, in the range of 1 to
4294967295.
allow-ibgp: Allows to redistribute IBGP routes. This keyword is optional when the protocol is bgp4+.
Description
Use ipv6 import-route to enable IPv6 IS-IS to redistribute routes from another routing protocol.
Use undo ipv6 import-route to disable route redistribution.
Route redistribution is disabled by default.
If no level is specified, the routes are imported to Level-2 routing table by default.
IPv6 IS-IS considers redistributed routes as routes to destinations outside the local routing domain.
You can specify a cost and a level for redistributed routes.
IMPORTANT:
Use the import-route bgp4+ allow-ibgp command with caution because it redistributes both EBGP
and IBGP routes, and the redistributed IBGP routes can cause routing loops.
Examples
# Configure IPv6–IS-IS to redistribute static routes and set the cost 15 for them.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 import-route static cost 15

ipv6 import-route isisv6 level-2 into level-1

Syntax
ipv6 import-route isisv6 level-2 into level-1 [ filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name | route-policy route-policy-name } | tag tag ] *
undo ipv6 import-route isisv6 level-2 into level-1
View
IS-IS view
Default level
2: System level
Parameters
acl6-number: Number of a basic or advanced ACL6 used to filter routes when they are leaking from
Level-2 to Level-1, ranging from 2000 to 3999.
ipv6-prefix-name: Name of an IPv6 prefix list used to filter routes when they are leaking from Level-2
to Level-1, a case-sensitive string of 1 to 19 characters.
route-policy-name: Name of a routing policy used to filter routes when they are leaking from Level-2
to Level-1, a case-sensitive string of 1 to 63 characters.
tag: Specifies a administrative tag number for the leaked routes, in the range of 1 to 4294967295.
337