Rapidlab 1200 Operator's Guide: System Configuration
Parameter
O
2
*
If ctHb is not available as an entered value and tHb is not available, the system uses 15 g/dL as a
default value.
†
The system uses a default value for these parameters.
‡
A calculated value determined from the total hemoglobin value.
Setting up Values
Use this screen to enter the default values for the O
ctO
(a- ):
2
1. At the Setup screen, select
The screen shows the current values.
2. Select the demographic you want to change.
3. Enter a value and then select
4. Select
Setting up System Options
When you select System Options at the Setup Window, the following options are
available:
•
Country Options
•
Date and Time
•
Sound
•
Other
Setting up Country Options
The Country Options screen allows you to perform the following tasks:
•
Select a language for the system screens and videos
•
Select a date format for your laboratory
Required Parameters and Sample Demographics
ctO
(a- ),
2
Parameters > Values
Save
.
Save
t
Binding Factor (OBF) and
2
.
.
8-19
02087462 Rev. V