Cleaning Procedures; Cleaning And Disinfecting The Screen - Siemens Rapidlab 1200 Operator's Manual

Rapidlab 1200 Operator's Guide: Maintenance

Cleaning Procedures

This section provides procedures for performing as needed cleaning.

Cleaning and Disinfecting the Screen

Use a lint-free cloth to clean the screen. Do not use a spray bottle to spray the
bleach solution on the screen.
You need the following materials for this task:
• Lint-free cloth
• 5% bleach solution
BIOHAZARD:
Refer to Appendix A, Protecting Yourself from Biohazards for recommended
precautions when working with biohazardous materials.
1. Moisten the cloth with the bleach solution so that the cloth is wet but not
dripping.
2. Select
3. To start the procedure, select
The cleaning screen is displayed for 20 seconds and allows you to wipe the
screen without activating any buttons.
4. Wipe the screen with the wet cloth.
5. Allow the screen to air dry.
After 20 seconds, the system returns to the Maintenance screen.
6. Dispose of the bleach solution according to your institution's protocol.
Wear personal protective equipment. Use universal precautions.
Status > Maintenance > Cleaning the Screen
.
Continue
5-21
.
02087462 Rev. V