Recall Screen; Status Screen - Siemens Rapidlab 1200 Operator's Manual

1-24

Recall Screen

Select the
menu options, refer to the following topics:
Button...
Patient
QC
Calibrations
Events Log
Copy Stored Results
Sample Totals

Status Screen

The system automatically displays the Status screen if an event occurs that needs your
attention before routine operation can continue. For example, the system displays the
Status screen with a Not Ready message when an error condition prevents sample analysis
or when you need to replace a cartridge because it is empty or expired.
You can also manually display the Status screen by selecting the
banner.
The display area of the Status screen displays the current status of each cartridge:
• the cartridge symbol
• percent volume
• time remaining until the cartridges must be replaced
• buttons to access Status area functions
Buttons on the Status screen display area access several system functions:
Button...
Replace
Maintenance
Diagnostics
Calibrate
Setup
System Info
Shutdown
02087462 Rev. V
Rapidlab 1200 Operator's Guide: System Overview and Intended Use
button to access stored results. For information about the Recall button
Recall
Refer to...
Recalling Patient Sample Results‚ page 2-30
Recalling QC Results‚ page 4-7, including QC Statistics
and Levey-Jennings Graphs
Recalling Calibration Results‚ page 3-4
Viewing System Messages‚ page 6-74
Copying Data Files‚ page 7-2
Viewing the Sample Totals‚ page 7-4
Refer to...
Replacing Supplies‚ page 2-2
Maintenance‚ page 5-1
Using Diagnostics‚ page 6-33
Calibration‚ page 3-1
System Configuration‚ page 8-1
Accessing System Information‚ page 2-5
Shutting Down the System‚ page 2-6
button on the
Status