Table of Contents
Advertisement
Rapidlab 1200 Operator's Guide: System Configuration
To set up maintenance tasks on your system, perform the following steps:
1. At the Setup screen, select
2. Select the down arrow button and then select
3. Select
4. At the Setup Maintenance screen, select and perform the following tasks as
necessary:
For this task...
Add a maintenance task, a.
Edit the frequency of a
predefined or user
defined maintenance
task,
Delete a user defined
maintenance task,
Enable and disable
maintenance tasks,
View maintenance task
details,
Secured Options
.
Setup Schedule
Then...
Select
b.
Enter a Description.
c.
Edit the Frequency.
d.
Edit the Task Due On.
e.
Select
a.
Select a task.
b.
Select
You cannot decrease the frequency of a predefined
NOTE:
task. You can only increase it. You cannot edit the name of a
predefined task.
c.
Select
d.
Select the frequency.
The system displays screens for selecting a time period
or set of times appropriate to your selection.
e.
Select
The Save button is not available until you make all the
necessary selections.
a.
Select a task.
b.
Select
User defined maintenance tasks are the only tasks
NOTE:
you may delete. When you select a predefined maintenance
task, the Delete button is disabled.
c.
Select
a.
Select a task.
b.
Select
c.
Select
select
Details
.
Maintenance
.
Add
.
Save
.
Edit
.
Frequency
.
Save
.
Delete
.
Yes
.
Edit
.
Enable
.
8-45
.
02087462 Rev. V
Advertisement
Table of Contents
Troubleshooting
