Table of Contents
Advertisement
Rapidlab 1200 Operator's Guide: Operating the System
To check, go to step 2.
Figure 2-2
2. Verify the valve is correctly aligned as shown in Figure 2-2, with the top of
the valve between the 2 arrows.
If the valve is not correctly aligned, manually move the valve so the top of the
valve is aligned between the two arrows.
3. Select the Status screen.
Enter your password if necessary.
4. Select the AutomaticQC icon
5. Select Replace > Yes.
6. Follow the instructions in the video to reinstall the cartridge.
Accessing System Information
You may need to access system information for assistance or when ordering
supplies. To access system information, select
Accessing Online Help
The system has online Help that provides troubleshooting and maintenance
procedures, and general information about using the system. Select the help
button, which appears as a question mark in the banner section of the main
screens.
The system initiates some online help automatically when you select certain
functions.
Valve Aligned so Top of the Valve is Between 2 Arrows
Status > System Information
02087462 Rev. V
2-5
.
Advertisement
Table of Contents
Troubleshooting
