Viewing The Sample Totals - Siemens Rapidlab 1200 Operator's Manual

7-4
3. Copy the data:
If you are
copying data...
to CD,
to email,
to diskettes,

Viewing the Sample Totals

Sample totals include the following information:
• Total number of patient analyses and QC analyses (from QC samples that are not
barcoded) for the system
• Number of patient analyses for each parameter
The system does not include Required QC samples, AutomaticQC samples, and any other
QC samples that are barcoded in the sample totals.
Use the following steps to view the sample totals:
1. Select
2. You can select
3. Select
02087462 Rev. V
Then...
a. Select
CD
b. When prompted, insert the CD into the drive and select
Continue
c. When prompted, remove the CD from the drive and select
Continue
d. Select
Return
a. Select
Email
When the system finishes copying data, the system displays
the System Data screen.
b. Select
Return
a. Select
Diskettes
b. When prompted, insert the first diskette into the drive and
select
Continue
The system displays the number of diskettes required on the
screen.
c. When prompted, remove the diskette from the drive, insert
the next diskette in the sequence, and select
d. Continue removing and inserting diskettes as prompted.
e. Select
Return
Recall > Sample Totals
to print the sample totals.
Print
.
Return
Rapidlab 1200 Operator's Guide: File Management
.
.
.
.
.
.
.
.
.
.
.
Continue