Table of Contents
Advertisement
Rapidlab 1200 Operator's Guide: File Management
Copying Patient, QC, or Calibration Data Files
1. Select
NOTE:
left of the buttons.
2. Select the type of data you want to copy,
3. Select the type of data storage you are using,
4. Insert the diskette or CD into the appropriate drive:
If you selected...
Diskette,
CD,
5. Store the diskettes or CD in a safe place, away from heat and strong magnetic
sources such as centrifuges.
Copying Diagnostic Data
Use this procedure to copy diagnostic data to a diskette, CD, or to a remote site
using a network connection. To copy data through a network connection you must
configure your system for a network, and connect it to a device that provides
access to the remote site.
The system stores data for each day including the current day and the previous 29
days.
1. Select
2. Select the data or log information to copy.
To copy...
wash cartridge information,
reagent cartridge information,
AutomaticQC cartridge information,
summary data for the database,
data for a single day,
log information for a single day,
Recall > Copy Stored Results
The system displays the date for the last time you copied data to the
Then...
The number of diskettes required is displayed on the screen.
a.
When prompted, remove the diskette from the drive and
insert the next diskette in the sequence.
b.
Select
Continue
c.
Continue removing and inserting diskettes, as prompted.
d.
When prompted, remove the last diskette from the drive and
select
Continue
a.
When prompted, insert the CD into the drive and select
Continue
b.
When prompted, remove the CD from the drive and select
Continue
Recall > Copy Stored Results > System Data
.
,
Patient
QC
or
CD
diskette
.
.
.
.
Then...
select
.
Wash
select
.
Reagent
select
.
AQC
select
.
Summary
select the date.
select the date and then select
7-3
, or
.
Calibrations
.
.
.
Logs Only
02087462 Rev. V
Advertisement
Table of Contents
Troubleshooting
