Siemens Rapidlab 1200 Operator's Manual page 31

Rapidlab 1200 Operator's Guide: System Overview and Intended Use
The cartridge interface frame also engages the fluid connectors on the cartridge
with the connectors on the reagent manifold to create the fluid path for calibrators,
samples, and waste. The pierce probes engage the pierce pins on the interface
plate and the fittings on the bags of calibrators.
1
2
3
Figure 1-11
The fluid connectors on the reagent manifold engage with the fluid connectors on
the reagent and wash cartridges to create the fluid path for reagents, samples, and
waste.
1
2
3
4
5
Figure 1-12
Systems–front view
Pierce probes
Fluid connector for AutomaticQC materials
Fluid connectors to the reagent manifold
Reagent Cartridge–Back View
Measurement module waste tubing
Sample tubing
CO-ox waste tubing
RCx reagent from wash cartridge tubing
Wash fluid from wash cartridge tubing
Reagent Manifold for the Rapidlab 1245 and 1265
1-11
02087462 Rev. V