Rapidlab 1260 System Performance Characteristics; Precision On Controls - Siemens Rapidlab 1200 Operator's Manual

E-30

Rapidlab 1260 System Performance Characteristics

All performance data presented in this section was generated using the Rapidlab 1260
system. The system performed calibrations using the default settings recommended by
Siemens for optimum performance. All reported values were corrected to 760 mmHg. All
data was collected at room temperature (about 23°C). You should determine your own
performance characteristics in your laboratory with your Rapidlab 1260 system.

Precision on Controls

Quality control materials, including manual (QC) and automatic (AutomaticQC) were
analyzed on the Rapidlab 1260 system. Manual QC is performed by the operator while
AutomaticQC is performed automatically by the system based on the QC frequency
defined in the system software. The results are presented here.
02087462 Rev.V
Rapidlab 1200 Operator's Guide: System Specifications