Using The Sensors Screen - Siemens Rapidlab 1200 Operator's Manual

6-44

Using the Sensors Screen

The Sensors screen has two print buttons:
• Last Cal
• Measurement
The Last Cal report contains data for each sensor from the last 2-point or full calibration.
The report provides the system ID, the date and time of the report, and sensor data in the
order represented in Table 6-6.
The Measurement report contains a measurement of readings for all the sensors.
For information about printing the Last Cal or Measurement report, refer to Performing
Tests and Printing Diagnostic Reports‚ page 6-34.
Table 6-6
Row number
1
2
3
4
5
6
7
8
9
02087462 Rev. V
Last Cal Report Values
Sensor
pH
pCO
pO
Na
K
Ca
Cl¯
Glu
Lac
Rapidlab 1200 Operator's Guide: Troubleshooting
2
2
+
+
++