Undervoltage Error Level - Delta ASD-B2-0121-B User Manual

Chapter 7 Servo Parameters
Display Format: Decimal
Settings:
In speed mode, the users can use this parameter to add an offset value to analog
speed input.
P4 - 24 LVL

Undervoltage Error Level

Address: 0430H, 0431H
Default: 160 Related Section: N/A
Applicable Control Mode: ALL
Unit: V (rms)
Range: 140 ~ 190
Data Size: 16-bit
Display Format: Decimal
Settings:
2
When DC Bus voltage is lower than the value of P4-24 x , the fault, Undervoltage
will occur.
7-83
Revision June 2010