Delta ASD-B2-0121-B User Manual page 242

Setting value: 0x45
DI Name
Pulse inhibit input. When the drive is in position
INHP mode, if INHP is activated, the external pulse input
command is not valid.
NOTE
1) 11 ~ 17: Single control mode, 18 ~ 20: Dual control mode
2) When P2-10 to P2-17 and P2-36 is set to 0, it indicates input function is disabled.
Revision June 2010
DI Function Description
Chapter 7 Servo Parameters
Trigger Control
Method Mode
Level
PT
Triggered
7-89