Delta ASD-B2-0121-B User Manual page 66

Be sure to connect a diode when the drive is applied to inductive load.
(Permissible current: 40mA, Instantaneous peak current: max. 100mA)
C5: Wiring of DO signal, for the use of
internal power supply, general load
C7: Wiring of DO signal, for the use of
external power supply, general load
Revision June 2010
Chapter 3 Connections and Wiring
C6: Wiring of DO signal, for the use of
internal power supply, inductive load
C8: Wiring of DO signal, for the use of
external power supply, inductive load
3-29