Watermark; Software Options - Xerox DocuCentre-III C4100 Manual

Software Options

This feature is for customer engineer use. For more information, contact our Customer
Support Center.
Document Feeder Scanning Position
Allows you to adjust scanning position for the Document Feeder. To reset the scanning
positions using the factory-default position, use the [Factory Settings] button.
Finisher Adjustment
Appears when the Finisher-B1 (option) is attached.
Hole Punch Tool
Specifies either 2/4 hole punch kit or US 2/3 hole punch kit.
Adjust Punch Position/Booklet Fold Position
Specifies punching position and folding position for a paper size less than B4 and greater
than or equal to B4.
Delete All Certificates/Initialize Settings
All certificates stored in the machine will be deleted, and security settings associated with
certificates will be initialized.

Watermark

You can make settings relating to Watermark.
Date Format
Set the format for printing dates in annotations and Watermark. This setting is common to
Annotation and Watermark.
Three format types are available: 20yy/mm/dd, dd/mm/20yy, and mm/dd/20yy.
Default Watermark Effect
Set the type of text effect for Watermark.
Off
A text effect is not applied.
Embossed
The text hidden in the background is embossed. The text part is printed with the pattern
specified in [Background Pattern].
Outline
The text hidden in the background is printed as white cutout. In the background other than the
text printed as white cutout, the pattern set is [Background Pattern] is printed.
Default Watermark
Set text to be printed with Watermark.
You can select text from [Copy Prohibited], [Copy], [Duplicate], and the strings registered on
Custom Text 1 to 3.
For more information about Custom Text, refer to "Custom Watermark 1 to 3" (P.118).
Font Size
Set the size of the text printed with Watermark.
You can set the value from 24 to 80 points in 1 point increments.
Common Service Settings
117
5