Parts List - Nebs Kit; Rack Kit Parts - IBM SAN512B-6 Installation, Service And User Manual

1 - Left rack mount shelf bracket
2 - Right rack mount shelf bracket
3 - 10-32 x 5/8 in. (1.58 cm) panhead Phillips screw and washer
4 - 10-32 clip nut for racks that have rails with round holes
5 - 1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with lock washer for racks that have rails with round holes
6 - 10-32 retainer nut for racks that have rails with square holes
7 - 1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with thread locker for racks that have rails with square holes
8 - 3/8 in. (0.953 cm) alignment washer for racks that have rails with square holes
Figure 3. Rack kit parts
Parts list – NEBS kit
|
|
|
|
|
22
SAN512B-6 Installation, Service, and User Guide
The following table lists the parts supplied in the NEBS KIT to help direct airflow
away from the rack area. This kit is only supported for specific devices, and may
not apply to the device that you are installing.
Note: Depending on the device and installation, not all of the parts may be used.