Assembling The Rack Hardware; Rack Kit Parts - IBM SAN512B-6 Installation, Service And User Manual

Figure 9. Rack kit parts
Note: Not all parts may be used with certain installations depending on the device
type.

Assembling the rack hardware

About this task
Perform the following steps to assemble the rack hardware.
30
SAN512B-6 Installation, Service, and User Guide
1 - Tray, front, mid-mount, chassis
2 - Tray, rear, mid-mount, chassis
3 - Adapter, rear, mid-mount, right
4 - Adapter, rear, mid-mount, left
5 - Screw, 10-32 x 3/8", pan head Phillips, ST, zinc (requires a torque of 32
inch-pounds)