IBM SAN512B-6 Installation, Service And User Manual page 32

ESD precautions
Power precautions
8
SAN512B-6 Installation, Service, and User Guide
CAUTION:
Never leave tools inside the chassis.
CAUTION:
Use the screws specified in the procedure. Using longer screws can
damage the device.
DANGER
For safety reasons, the ESD wrist strap should contain a series 1
megaohm resistor.
DANGER
For safety reasons, the ESD wrist strap should contain a series 1
megaohm resistor.
DANGER
If the installation requires a different power cord than the one
supplied with the device, make sure you use a power cord
displaying the mark of the safety agency that defines the
regulations for power cords in your country. The mark is your
assurance that the power cord can be used safely with the device.
DANGER
Make sure that the power source circuits are properly grounded,
then use the power cord supplied with the device to connect it to
the power source.
CAUTION:
Use a separate branch circuit for each power cord, which provides
redundancy in case one of the circuits fails.
DANGER
High Touch Current. Earth connection essential before connecting
supply.