IBM SAN512B-6 Installation, Service And User Manual page 149

11. Pull the blade out from the slot slightly using the ejector handles until you can
grasp the blade edges with your hands. Make sure that the blade has cooled
sufficiently to touch.
CAUTION:
To avoid damaging blade and chassis, do not push the blade into a slot or
pull the blade from a slot using the ejector handles.
12. Continue pulling the blade from the slot by the blade edges. As you slide out
the blade, place one hand under it for support. Do not support the blade by
the injector handles after removal.
Chapter 8. Core Routing Blades
125