Installing The Device In The Rack; Attaching The Front Tray To The Rack Rails - IBM SAN512B-6 Installation, Service And User Manual

1 - Tray, front, mid-mount, chassis
2 - Screws
Figure 11. Attaching the front tray to the rack rails

Installing the device in the rack

About this task
Note: A fully populated device requires a hydraulic or assisted lift to install into a
rack.
Perform the following steps to load the device into the mid-mount trays.
32
SAN512B-6 Installation, Service, and User Guide
DANGER
Use safe lifting practices when moving the product.
18-32 kg (39.7-70.5 lbs)