Establishing A Serial Connection To The Device - IBM SAN512B-6 Installation, Service And User Manual

|
|
|
|

Establishing a serial connection to the device

46
SAN512B-6 Installation, Service, and User Guide
1. Power cable
2. Connector latch
About this task
To establish a serial connection to the console port on the device, complete the
following steps.
Procedure
1. Verify that the device is powered on and that POST is complete by verifying
that all power LED indicators on the power supplies, fans, and blades display a
steady green light.
2. Remove the shipping cap from the console (I0I0) port on the active CP blade.
The active CP is indicated by an illuminated blue LED on the CP blade front
panel.
Note: The console, or serial port is intended primarily for the initial setting of
the IP address and for service purposes.