Safety Labels - IBM SAN512B-6 Installation, Service And User Manual

Laser dangers

Safety labels

As an added precaution, safety labels are often installed directly on products or
product components to warn of potential hazards. These can be either danger or
caution notices, depending upon the level of the hazard.
The actual product safety labels may differ from these sample safety labels:
xviii
SAN512B-6 Installation, Service, and User Guide
DANGER
High Touch Current. Earth connection essential before connecting
supply.
DANGER
All fiber-optic interfaces use Class 1 lasers.
DANGER
Use only optical transceivers that are qualified by IBM and comply
with the FDA Class 1 radiation performance requirements defined
in 21 CFR Subchapter I, and with IEC 825 and EN60825. Optical
products that do not comply with these standards might emit light
that is hazardous to the eyes.
DANGER
Laser Radiation. Do Not View Directly with Optical Instruments.
Class 1M Laser Products.
DANGER
Hazardous voltage, current, or energy levels are present inside
any component that has this label attached. Do not open any
cover or barrier that contains this label. (L001)
Do not service, there are no serviceable parts.