San Rack Specifications; Ipdu (Pn 00Fw787) For Director Attachment; Ibm San Rack Specifications - IBM SAN512B-6 Installation, Service And User Manual

|
| |
|
|
|
|

SAN rack specifications

|
|
|
|
|
|
|
| |
| |
| |
| |
|
| |
|
| |
| |
|
|
|
|
iPDU for director attachment:
Figure 74. iPDU (PN 00FW787) for director attachment
The physical dimension specifications for the SAN rack are listed in Table 25. An
example weight with two M12 directors installed is also included. (The M12 is
heavier than either the M14 or M48, fully populated.) The total weight of a rack
with directors installed will depend upon which directors are installed. For the
specifications of individual directors, see the respective installation and service
guides.
Table 25. IBM SAN rack specifications
Dimension
Height
Depth
Width
EIA units
Weight
Note: The maximum supported configuration for a SAN rack is two directors.
Value
1785 mm (70.3 in.)
v With rear door installed: 1042 mm (41 in.)
v With rear and front door installed: 1098 mm (43.3 in.)
v With side panels installed: 650 mm (25.6 in.)
v Without side panel installed: 623 mm (24.5 in.)
36 EIA units
rack 535 lbs
rack with two 8961 Model F08 directors: 535 lbs + 2 x 321.5
233
Appendix A. SAN rack