Sx6 Blade Port Numbering And Trunking; Sx6 Extension Blade Port Numbering - IBM SAN512B-6 Installation, Service And User Manual

SX6 blade port numbering and trunking

The following illustration shows how ports are numbered on the blade. Ports are
labeled as 10GE, 40 GbE, and FC on the blade.
Figure 34. SX6 extension blade port numbering
Following are the eight-port Fibre Channel port groups for configuring trunk
groups or "trunks":
v Port group 0: ports 0–7
v Port group 1: ports 8–15
1 - 40 GbE port 0
2 - 40 GbE port 1
3 - 10/1 GbE ports 2–9 (bottom to top)
4 - 10/1 GbE ports 10–17 (bottom to top)
5 - FC ports 0, 1, 2, 3, 8, 9, 10, 11 (bottom to top)
6 - FC ports 4, 5. 6, 7, 12, 13, 14, 15 (bottom to top)
Chapter 7. Port and Extension Blades
109