Door; Relocating The Rack; Removing The Rack Door - IBM SAN512B-6 Installation, Service And User Manual

|
Hinges

Door

|
|
Figure 72. Removing the rack door
|
|
|
|
|
|

Relocating the rack

|
| |
|
|
|
> 500 lbs. (> 227 kg. )
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
Hinge Mounting Screws
Replacing the rack door: Perform the following steps to replace the front or rear
door:
1. Align the door with the hinge pin.
2. Install the bottom hinge pin (the longest pin) first.
3. Install the top hinge pin (the shortest pin) second.
DANGER
Heavy Equipment - Personal injury or equipment damage may result if mishandled
(D006)
Attention: Refer to "Danger notices" on page xv for safety information regarding
moving the rack. Professional movers/riggers may be required.
CAUTION:
Refer to "Rack safety" on page xx (R001, R002) for weight balance and
loading safety notices before moving loaded racks or racks.
Perform the following steps to relocate the rack:
1. Turn off all power to the rack and the devices installed.
2. Disconnect all power and all device cables.
3. Unbolt the rack from the floor or remove the stabilizers.
4. Raise all the leveling feet.
Latch Mounting Screws
Latch
Door Removed for Clarity
SJ000659
225
Appendix A. SAN rack