Attaching The Rear Tray To The Rack Rails - IBM SAN512B-6 Installation, Service And User Manual

Procedure
1. Attach the rear tray (with or without adapter, as required) to both rack rails.
2. Attach the front tray to both rack rails. Orient the tray (Figure 3) and use nine
3. Verify that the rear edge of the front tray is seated into the front edge of the
1 - Tray, rear, mid-mount, chassis
2 - Adapter, rear, mid-mount, right
3 - Adapter, rear, mid-mount, left
4 - Screws
Figure 10. Attaching the rear tray to the rack rails
Orient the tray (refer the following figure) and use nine screws (Item E) for
each rail.
screws (Item E) for each rail.
rear tray.
Chapter 3. Mounting the Device
31