Ip Source-Guard - Cisco Sx350 Cli Manual

DHCP Snooping Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Example
The following examples displays the DHCP snooping binding database and
configuration information for all interfaces on a device.-
switchxxxxxx#
show ip dhcp snooping binding
Update frequency: 1200
Total number of binding: 2
Mac Address IP Address
------------ ---------
0060.704C.73FF 10.1.8.1
0060.704C.7BC1 10.1.8.2

13.11 ip source-guard

Use the ip source-guard command in Configuration mode or Interface
Configuration mode to enable IP Source Guard globally on a device or in Interface
Configuration (Ethernet, Port-channel) mode to enable IP Source Guard on an
interface.
Use the no form of this command to disable IP Source Guard on the device or on
an interface.
Syntax
ip source-guard
no ip source-guard
Parameters
N/A
Default Configuration
IP Source Guard is disabled.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Lease Type
(sec)
------- --------
7983 snooping
92332 snooping
(s)
VLAN Interface
----
---------------
3
gi11
3
gi12
13
330