Aaa Authentication Enable - Cisco Sx350 Cli Manual

Authentication, Authorization and Accounting (AAA) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Keyword Description
radius Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for
tacacs
authentication.
Default Configuration
If no methods are specified, the default are the locally-defined users and
passwords. This is the same as entering the command aaa authentication login
local.
Command Mode
Global Configuration mode
User Guidelines
Create a list of authentication methods by entering this command with the
list-name
parameter where
arguments identifies the list of methods that the authentication algorithm tries, in
the given sequence.
The default and list names created with this command are used with the
authentication command.
The no aaa authentication login
has not been referenced by another command.
Example
The following example sets the authentication login methods for the console.
switchxxxxxx(config)#
switchxxxxxx(config)#
switchxxxxxx(config-line)#
5.2

aaa authentication enable

The aaa authentication enable Global Configuration mode command sets one or
more authentication methods for accessing higher privilege levels. To restore the
default authentication method, use the no form of this command.
list-name
is any character string. The method
list-name
command deletes a list-name only if it
aaa authentication login authen-list radius local none
line console
login authentication authen-list
5
login
172