Table of Contents
Advertisement
DNS Client Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
To return to the default behavior, use the no form of this command.
Syntax
seconds
ip domain timeout
no ip domain timeout
Parameters
seconds
—Time, in seconds, to wait for a response to a DNS query. The range is
from 1 to 60.
Default Configuration
The default value is 2 seconds.
Command Mode
Global Configuration mode
User Guidelines
Use the command to change the default time out value. Use the no form of this
command to return to the default time out value.
Example
The following example shows how to configure the switch to wait 50 seconds for a
response to a DNS query:
switchxxxxxx(config)#
15.7 ip host
Use the ip host Global Configuration mode command to define the static host
name-to-address mapping in the DNS host name cache.
Use the no form of this command to remove the static host name-to-address
mapping.
Syntax
hostname address1
ip host
ip domain timeout 50
address2...address8
[
]
15
368
Advertisement
Table of Contents
