Show Bridge Multicast Reserved-Addresses - Cisco Sx350 Cli Manual

Address Table Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
The actions define by this command has precedence over forwarding rules
defined by applications/protocols (STP, LLDP etc.) supported on the device.
Example
switchxxxxxx(config)#
4.35 show bridge multicast
reserved-addresses
To display the Multicast reserved-address rules, use the show bridge multicast
reserved-addresses Privileged EXEC mode command.
Syntax

show bridge multicast reserved-addresses

Command Mode
Privileged EXEC mode
Example
switchxxxxxx # show bridge multicast reserved-addresses
MAC Address Frame Type
------------------ ----------- --------------
01-80-C2-00-00-00
bridge multicast reserved-address
Protocol
LLC-SNAP 00-00-0C-01-29
00:3f:bd:45:5a:b1
Action
------------
Bridge
4
170