Show Ipv6 Mld Counters - Cisco Sx350 Cli Manual

40
829
Syntax
ipv6 mld version {1 | 2}
no ipv6 mld version
Parameters
•
1—MLD Version 1.
•
2—MLD Version 2.
Default Configuration
1
Command Mode
Interface Configuration mode
User Guidelines
Use the command to change the default version of MLD.
Example
The following example configures the router to use MLD Version 1:
switchxxxxxx(config)# interface vlan 100
switchxxxxxx(config-if)# ipv6 mld version 1
switchxxxxxx(config-if)# exit

40.8 show ipv6 mld counters

To display the Multicast Listener Discovery (MLD) traffic counters, use the show
ipv6 mld counters command in User EXEC mode.
Syntax
show ipv6 mld counters [
Parameters
•
interface-id
—(Optional) Interface Identifier.
interface-id
]
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
MLD Commands