Show Cdp - Cisco Sx350 Cli Manual

CDP Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Syntax
clear cdp table
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
The example deletes all entries from the CDP Cache tables:
switchxxxxxx# clear cdp table

8.16 show cdp

To display the interval between advertisements, the number of seconds the
advertisements are valid and version of the advertisements, use the show cdp
Privileged EXEC mode command in Privileged EXEC mode.
Syntax
show cdp
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx#
show cdp
Global CDP information:
cdp is globally enabled
cdp log duplex mismatch is globally enabled
cdp log voice VLAN mismatch is globally enabled
cdp log native VLAN mismatch is globally disabled
Mandatory TLVs are
8
220