Cisco Sx350 Cli Manual page 795

Link Layer Discovery Protocol (LLDP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Field
Power Source
LLDP MED
Capabilities
Device type
LLDP MED - Network Policy
Application type
Flags
VLAN ID
Layer 2 priority
DSCP
LLDP MED - Power Over Ethernet
Power type
Power Source
Description
The power source utilized by a PSE or PD
device. A PSE device advertises its power
capability. The possible values are: Primary
power source, Backup power source.
Unknown Power source, PSE and local
power source, Local Only power source and
PSE only power source.
The sender's LLDP-MED capabilities.
The device type. Indicates whether the
sender is a Network Connectivity Device or
Endpoint Device, and if an Endpoint, to which
Endpoint Class it belongs.
The primary function of the application
defined for this network policy.
Flags. The possible values are:
Unknown policy: Policy is required by the
device, but is currently unknown.
Tagged VLAN: The specified application
type is using a tagged VLAN.
Untagged VLAN: The specified application
type is using an Untagged VLAN.
The VLAN identifier for the application.
The Layer 2 priority used for the specified
application.
The DSCP value used for the specified
application.
The device power type. The possible values
are: Power Sourcing Entity (PSE) or Power
Device (PD).
The power source utilized by a PSE or PD
device. A PSE device advertises its power
capability. The possible values are: Primary
power source and Backup power source. A
PD device advertises its power source. The
possible values are: Primary power, Local
power, Primary and Local power.
36
794