Clear Power Inline Monitor Consumption - Cisco Sx350 Cli Manual

45
Power over Ethernet (PoE) Commands
Command Mode
Privileged EXEC mode
User Guidelines
The clear power inline counters command is used to reset power inline interface
counters: Overload, Short, Denied, Absent and Invalid Signature .
Example
The following example clears the power inline counters for gi12.
switchxxxxxx#
clear power inline counters gi12

45.15 clear power inline monitor consumption

To clear power inline consumption monitor info on all or on a specific interface or
interface list, use the clear power inline monitor consumption Privileged EXEC
mode command.
Syntax
[interface-id-list]
clear power inline monitor consumption
Parameters
interface-id-list—(Optional) Specifies a list of interface ID. The interface ID must
be an Ethernet port type. If interface ID is not specified - consumption information
for all interfaces is cleared.
Default Configuration
All monitored interface info are cleared.
Command Mode
Privileged EXEC mode
907 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide