Table of Contents
Advertisement
26
543
7 so-0-2-0x1.aa1.mich.net (192.122.183.9)
8 atm1-0x24.michnet8.mich.net (198.108.23.82)
9 * * *
10 A-ARB3-LSA-NG.c-SEB.umnet.umich.edu(141.211.5.22)58 msec 58msec 58 msec
11 umaxp1.physics.lsa.umich.edu (141.211.101.64)
Trace completed
The following table describes the significant fields shown in the display:
Field
1
i2-gateway.stanford.
edu
192.68.191.83
1 msec 1 msec 1
msec
The following are characters that can appear in the traceroute command output:
Field
Description
*
The probe timed out.
?
Unknown packet type.
A
Administratively unreachable. Usually, this output
indicates that an access list is blocking traffic.
F
Fragmentation required and DF is set.
H
Host unreachable.
N
Network unreachable.
P
Protocol unreachable.
Q
Source quench.
R
Fragment reassembly time exceeded
S
Source route failed.
U
Port unreachable.
Description
Indicates the sequence number of the router
in the path to the host.
Host name of this router.
IP address of this router.
Round-trip time for each of the probes that
are sent.
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
IP System Management Commands
56 msec
53 msec 54 msec
56 msec 56 msec 57 msec
62 msec 63 msec 63 msec
Advertisement
Table of Contents
