Show Ip Arp Inspection List - Cisco Sx350 Cli Manual

13
345
Parameters
•
interface-id
—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
User EXEC mode
Example
The following example displays the ARP inspection configuration.
switchxxxxxx# show ip arp inspection
IP ARP inspection is Enabled
IP ARP inspection is configured on following VLANs: 1
Verification of packet header is Enabled
IP ARP inspection logging interval is: 222
Interface Trusted
----------- -----------
gi1
1 Yes
gi1 2 Yes

13.28 show ip arp inspection list

Use the show ip arp inspection list Privileged EXEC mode command to display the
static ARP binding list.
Syntax
show ip arp inspection list
Parameters
N/A
Command Mode
Privileged EXEC mode
seconds
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
DHCP Snooping Commands