IPv6 First Hop Security
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Attached to VLAN 100
RA Guard Policy: policy1
Neighbor Bind Policy: policy2
Attached to port gi11 and VLAN 100
IPv6 First Hop Security Policy: FHSpolicy
ND Inspection Policy: policy1
RA Guard Policy: policy3
Neighbor Bind Policy: policy3
IPv6 Source Guard Policy: policy4
29.69 show ipv6 first hop security counters
To display information about the packets counted by the port counter, use the
show ipv6 first hop security counters command in privileged EXEC mode.
Syntax
show ipv6 first hop security counters interface
Parameters
•
interface-id
interface
channel.
Command Mode
Privileged EXEC mode
User Guidelines
This command displays packets handled by the switch that are being counted in
port counters. The switch counts packets captured per port and records whether
the packet was received, bridged, or dropped. If a packet is dropped, the reason
for the drop and the feature that caused the drop are both also provided.
Examples
The following examples displays information about packets counted on port gi1
switchxxxxxx#
show ipv6 first hop security counters interface gi11
interface-id
—Displays counters for specified Ethernet port or port
29
:
1
700