Cisco Sx350 Cli Manual page 380

16
379
Resolved Timer: 25 usec
Local Rx Timer: 20 usec
Example 8 - The following is the information displayed when EEE and EEE LLDP are
running on the port.
switchxxxxxx# show eee gi13
Port Status: UP
EEE capabilities:
Speed 10M: EEE not supported
Speed 100M: EEE supported
Speed 1G: EEE supported
Speed 10G: EEE not supported
Current port speed: 1000Mbps
EEE Remote status: enabled
EEE Administrate status: enabled
EEE Operational status: enabled
EEE LLDP Administrate status: enabled
EEE LLDP Operational status: enabled
Resolved Tx Timer: 10usec
Local Tx Timer: 10 usec
Remote Rx Timer: 5 usec
Resolved Timer: 25 usec
Local Rx Timer: 20 usec
Remote Tx Timer: 25 usec
Example 9 - The following is the information displayed when EEE is running on the
port, EEE LLDP is enabled but not synchronized with the remote link partner.
switchxxxxxx#
show eee gi14
Port Status: up
EEE capabilities:
Speed 10M: EEE not supported
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
EEE Commands