Show Ip Source-Guard Configuration - Cisco Sx350 Cli Manual

DHCP Snooping Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
By default, once every 60 seconds the software conducts a search for available
space in the TCAM for the inactive IP Source Guard addresses.
Execute the ip source-guard tcam retries-freq
to disable automatic retries for TCAM space, and then execute this command to
manually retry locating TCAM resources for the inactive IP Source Guard
addresses.
The show ip source-guard inactive
source guard addresses.
Example
The following example manually retries to locate TCAM resources.
switchxxxxxx# ip source-guard tcam locate

13.15 show ip source-guard configuration

Use the show ip source-guard configuration EXEC mode command to display the
IP source guard configuration for all interfaces or for a specific interface.
Syntax
show ip source-guard configuration [i
Parameters
•
interface-id
—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
User EXEC mode
command with the never keyword
EXEC mode command displays the inactive IP
nterface-id
]
13
334