Radius Server Traps Accounting - Cisco Sx350 Cli Manual

Radius Server Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Use the no radius server nas secret
NAS and its secret key.
Use the no radius server nas secret command, to delete all NASs and all secret
keys.
Examples
Example 1. The following example defines a default secret key:
switchxxxxxx(config)#
Example 2. The following example defines a default secret key:
switchxxxxxx(config)#
Example 3. The following example defines a NAS using the default secret key:
switchxxxxxx(config)#

49.11 radius server traps accounting

To enable sending accounting traps, use the radius server traps accounting
command in Global Configuration mode. To disable the traps, use the no form of
this command.
Syntax
radius server traps accounting
no radius server traps accounting
Parameters
N/A
Default Configuration
Accounting traps are disabled.
ip-address
radius server nas secret key qrBut56$#qw default
radius server nas secret key qrBut56$#qw default
radius server nas secret 10.05.10.1
command, to remove the given
49
984