Table of Contents
Advertisement
17
399
Default Configuration
None.
Command Mode
Privileged EXEC mode
Examples
—
Example 1
The following example reactivates interface gi11:
switchxxxxxx#
errdisable recovery reset interface
—
Example 2
The following example reactivates all interfaces regardless their
state:
switchxxxxxx#
errdisable recovery reset all
—
Example 3
The following example enables all interfaces in the port security
Err-Disable state
switchxxxxxx#
errdisable recovery reset port-security
17.19 show interfaces configuration
To display the configuration for all configured interfaces or for a specific interface,
use the show interfaces configuration Privileged EXEC mode command.
Syntax
show interfaces configuration
Parameters
•
interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
[interface-id | detailed
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Ethernet Configuration Commands
gi11
]
Advertisement
Table of Contents
