Show Snmp Users - Cisco Sx350 Cli Manual

Network Management Protocol (SNMP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
switchxxxxxx(config)#
switchxxxxxx(config)#

43.11 show snmp users

To display the configured SNMP users, use the show snmp users Privileged EXEC
mode command.
Syntax
username
show snmp users [
Parameters
username—(Optional) Specifies the user name. (Length: 1–30 characters)
Default Configuration
Display all users.
Command Mode
Privileged EXEC mode
Example
The following examples displays the configured SNMP users:
switchxxxxxx#
show snmp users
User name
Group name
Authentication Algorithm
Privacy Algorithm
Remote
Auth Password
Priv Password
User name
Group name
snmp-server user tom acbd v2c
snmp-server user tom acbd v3
]
:u1rem
:group1
: None
: None
:11223344556677
:
:
: qqq
: www
43
870