Ford 2003 Mustang Workshop Manual page 3665

seat control switch (14C715)
front seat backrest pad adjusting pump (65530)
front seat adjusting motor drive tube (618B62)
system wiring and circuit protection
front seat backrest adjusting hose (65528)
driver backrest and cushion bolster (Cobra)
driver bolster and lumbar adjusting pad pump motor and solenoid module (Cobra)
driver bolster and lumbar control switch (Cobra)
driver seat cushion adjusting hose (Cobra)
Seats — Front Seat Backrest Latch
NOTE: Under no circumstances are the front seat backrest latch components to be repaired as
individual components. If a front seat backrest latch (62648) or component is non-functional or
damaged, a new front seat backrest latch must be installed.
A release handle on the outboard rear corner of the seat backrest is manually operated to unlock the
front seat backrest latch.
Rear Seat
The rear seat cushion pad and frame (600A88) is retained in the following manner:
Pins are located on the bottom front of the rear seat cushion pad and frame which secure the
rear seat cushion pad and frame to the front floor pan (11135).
The pins are inserted into locking plates on the floor crossmember with a push button release.
The bottom of the rear seatback frame is retained with screws to the front floor pan.