Ford 2003 Mustang Workshop Manual page 4127

Hide thumbs Also See for 2003 Mustang:

Table of Contents

1. Underbody dimensions tolerances are ± 3.175 mm (0.125 in). Reference dimensions are not

controlled dimensions. Reference points are ± 4.76 mm (0.1875 in). All underbody dimensions

are detailed to the centerline of existing holes in the underbody assembly.

2. Inspect all unibody structural members for cracks, twists or bends. Check all welded

connections for cracks. Inspect support brackets for looseness.

325.43 mm (12.8122 in)

520.70 mm (20.500 in)

792.16 mm (31.1873 in)

992.18 mm (39.0621 in)

863.60 mm (34.00 in)

522.28 mm (20.5622 in)

1219.20 mm (48.00 in)

1454.15 mm (57.250)

893.76 mm (35.1873 in)

1484.31 mm (58.4373 in)

792.16 mm (38.1873 in)

819.15 mm (32.250 in)

404.81 mm (15.9374 in)

684.21 mm (26.9374 in)

522.28 mm (20.5622 in)

1181.10 mm (46.500 in)

385.76 mm (15.1874 in)

746.12 mm (29.375 in)

713.83 mm (28.1035 in)

RH 758.82 mm RH (29.875 in)

LH 755.65 mm LH (29.750 in)

114.30 mm (4.500 in)

127.00 mm (5.00 in)

152.40 mm (6.00 in)

96.93 mm (3.8122 in)

373.06 mm (14.6874 in)

369.88 mm (14.5622 in)

Show Quick Links

Table of Contents