Ford 2003 Mustang Workshop Manual page 3213

SECTION 412-03: Air Conditioning
REMOVAL AND INSTALLATION
Condenser Core
Material
Item
PAG Refrigerant Compressor
Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-
12-C)
Removal and Installation
NOTE: If an A/C condenser core leak is suspected, the A/C condenser core must be leak tested
before it is removed from the vehicle. For additional information, refer to
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning
system except when there is physical evidence of contamination from a failed A/C compressor or
damage to the suction accumulator.
All vehicles
1. Recover the refrigerant. For additional information, refer to
2. Remove the pin-type retainers and remove the upper radiator sight shield.
3. Remove the air cleaner and air cleaner outlet tube. For additional information, refer to
303-12 .
4.6L (2V), 4.6L (4V) vehicles
4. Remove the bolts and position the coolant bottle aside.
Specification
WSH-M1C231-
B
2003 Mustang Workshop Manual
Section 412-00
Section 412-00 .
.
Section