Ford 2003 Mustang Workshop Manual page 3205

SECTION 412-03: Air Conditioning
REMOVAL AND INSTALLATION
Evaporator Core
Removal and Installation
NOTE: The evaporator core is not separately serviceable, it is serviced only with the evaporator core
housing assembly.
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning
system except when there is physical evidence of contamination from a failed A/C compressor or
damage to the suction accumulator.
NOTE: If an evaporator core leak is suspected, the evaporator core must be leak tested before it is
removed from the vehicle. For additional information, refer to
1. Remove the evaporator core housing. For additional information, refer to
2. Transfer the components from the old evaporator core housing to the new evaporator core
housing.
3. Install the evaporator core housing. For additional information, refer to
2003 Mustang Workshop Manual
Section 412-00 .
Section 412-02
Section 412-02
.
.